In this set you are purchasing 8 sheets of Water Transfer Decals.
1. Remove the film from the sheet & cut out the design you wish to use on the nail.
2. Sit the design in water for 10-20 seconds (use warm water in winter).
3. Moisten the nail slightly and place the water transfer design on the nail in position.
4. Wipe up any excess water, being careful not to ruin the design you have just placed.
5. Once the area is completely dry, apply a UV/LED Top coat to encapsulate the entire decal/s to prevent it from lifting.
6. Cure the Top Coat as per normal.